DS18 PRO-DN24Ti.8 Compression Driver

This driver features a standard 2-inch throat diameter, so it requires a compatible bolt-on horn flare. Ensure your horn has a matching 4-bolt pattern (4xM6 at 102mm) to ensure a secure, airtight fit.

Yes, but because this is a high-frequency compression driver, you must use a proper crossover to protect it. It is designed to handle frequencies from 630Hz to 12.5KHz, so you should filter out any low-end frequencies that could damage the diaphragm.

The Neodymium magnet provides a much higher magnetic flux density in a smaller, lighter package. This allows for the high 109dB sensitivity, meaning the driver can produce significant volume with less power than a traditional ferrite magnet driver.

Yes, the polyimide diaphragm is designed for durability, but it is a serviceable component. If you happen to blow the voice coil or damage the diaphragm, you can purchase a replacement kit rather than replacing the entire driver unit.

This driver has an RMS power handling of 400 Watts. To get the best performance and clarity, you should pair it with an amplifier that can provide clean power within that RMS range, ensuring your gains are set correctly to avoid clipping.