weBoost Home Outside Antenna

A directional antenna, like this Yagi model, must be pointed directly toward your nearest cell tower to work effectively. Unlike omnidirectional antennas that pull signal from all directions, this one focuses its power on a specific source, which typically results in much stronger signal gain.

No, this antenna is specifically designed for 75-ohm systems. Using it with a 50-ohm booster will cause impedance mismatch, which can degrade performance and potentially damage your equipment.

You will need to identify the location of your carrier's nearest cell tower. Many users find success using online resources like CellMapper or OpenSignal to locate towers, then adjusting the antenna's direction while monitoring the signal strength on their phone or booster display.

Yes, because it features an F-Female connector, you should use a high-quality 75-ohm coaxial cable, such as RG-6 or RG-11. Ensure the cable is rated for outdoor use to prevent signal loss from weather exposure.

While it is physically possible, it is not recommended. This antenna is engineered for outdoor use to capture the cleanest signal before it is obstructed by walls, roofing materials, or insulation. Indoor placement will significantly reduce its effectiveness.

The antenna is constructed from durable aluminum with a protective plastic cover, designed to withstand standard outdoor elements. It is built to be weather-resistant, but it is always a good practice to ensure all cable connections are properly sealed with weatherproofing tape.