Powell Peralta Tail Bone

It is specifically designed for 8-inch decks. While it might physically attach to slightly wider or narrower boards, the curvature will not align perfectly, which could compromise its effectiveness and durability.

Yes, you will need to drill three small holes into the tail of your deck to secure the Tail Bone. The kit includes the necessary machine screws, but you will need a drill and a screwdriver for installation.

Because it adds a small amount of weight and material to the very end of the tail, you may notice a slight difference in the board's balance or pop initially. Most skaters adjust to this weight distribution within a few sessions.

While it is modeled after a classic, vintage shape, it is compatible with any deck that has an 8-inch tail width. It works on modern popsicle shapes as long as the tail geometry allows for the mounting screws to sit flush.

It is highly effective at absorbing the impact of tail slides and drops, which are the primary causes of razor tail. By acting as a sacrificial barrier, it significantly slows down the wear on the wooden plies of your deck.